Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Introduction

Having connectivity issues? Use this guide to replace the AirPort board.

  1. Remove the following P5 pentalobe screws securing the lower case to the MacBook Pro:
    • Remove the following P5 pentalobe screws securing the lower case to the MacBook Pro:

    • Eight 3.0 mm

    • Two 2.3 mm

  2. Lifting from the edge nearest the clutch cover, lift the lower case off the MacBook Pro.
    • Lifting from the edge nearest the clutch cover, lift the lower case off the MacBook Pro.

    • Set the lower case aside.

  3. Kits pour Nintendo Switch

    Une solution rapide pour reprendre le jeu

    Acheter un kit pour Switch

    Kits pour Nintendo Switch

    Une solution rapide pour reprendre le jeu

    Acheter un kit pour Switch
  4. Peel back the warning label covering the battery connector.
    • Peel back the warning label covering the battery connector.

  5. Using the flat end of a spudger, gently pry the battery connector straight up out of its socket on the logic board. Bend the battery cables back and out of the way, ensuring that the battery connector doesn't accidentally make contact with the logic board.
    • Using the flat end of a spudger, gently pry the battery connector straight up out of its socket on the logic board.

    • Bend the battery cables back and out of the way, ensuring that the battery connector doesn't accidentally make contact with the logic board.

  6. Use the tip of a spudger to detach the three antenna connectors up from their sockets on the AirPort board.
    • Use the tip of a spudger to detach the three antenna connectors up from their sockets on the AirPort board.

  7. Remove the single 2.9 mm T5 Torx screw securing the AirPort board to the logic board. Grasp the edges of the board and slide it out from its connector.
    • Remove the single 2.9 mm T5 Torx screw securing the AirPort board to the logic board.

    • Grasp the edges of the board and slide it out from its connector.

    • Lift and remove the AirPort board.

Conclusion

To reassemble your device, follow these instructions in reverse order.

7 autre(s) ont terminé cette réparation.

Andrew Optimus Goldheart

Membre depuis le 17/10/2009

450 901 Réputation

411 tutoriels rédigés

Équipe

iFixit Membre de l'équipe iFixit

Community

123 membres

11 785 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 3

7 derniers jours : 25

30 derniers jours : 109

Total : 10,212