Aller au contenu principal

Outils

Pièces

Aucune pièce spécifiée.

  1. If your I/O Board cable's connectors have notches in the padding, you will need to release a locking lever underneath the notch in order to remove the cable. If this is the case, don't pry up on the connector until the levers are unlatched. Using the flat end of a spudger, pry the I/O Board connector straight up out of its socket on the logic board. During reassembly, connect this end first as it does not flex.
    • If your I/O Board cable's connectors have notches in the padding, you will need to release a locking lever underneath the notch in order to remove the cable. If this is the case, don't pry up on the connector until the levers are unlatched.

    • Using the flat end of a spudger, pry the I/O Board connector straight up out of its socket on the logic board.

    • During reassembly, connect this end first as it does not flex.

    • In a similar fashion, remove the I/O Board connector from its socket on the I/O Board.

    • Remove the I/O Board cable from the MacBook Pro.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Brett Hartt

Membre depuis le 12/04/2010

123 874 Réputation

143 tutoriels rédigés

Équipe

iFixit Membre de l'équipe iFixit

Community

142 membres

16 784 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 3

Total : 213