Réparez vos affaires Communauté Boutique

MacBook Pro 15" Retina Display Mid 2012 Logic Board Assembly Replacement

Conditions préalables uniquement
Ce tutoriel est uniquement destiné à être utilisé comme prérequis d'autres tutoriels. Il ne se suffit pas à lui-même.

Introduction

Pre-req only.

Ce dont vous avez besoin

  1. MacBook Pro 15" Retina Display Mid 2012 Logic Board Assembly Replacement, Logic Board Assembly: étape 1, image 1 de 1

    • Use the flat end of a spudger to pry the headphone jack connector up from its socket on the logic board.

    Modifier

  2. MacBook Pro 15" Retina Display Mid 2012 Logic Board Assembly Replacement: étape 2, image 1 de 2 MacBook Pro 15" Retina Display Mid 2012 Logic Board Assembly Replacement: étape 2, image 2 de 2

    • Use the flat end of a spudger to pry the left speaker connector up and out of its socket on the logic board.

    • Use the tip of a spudger to pry the right speaker connector up and out of its socket on the logic board

    • Be sure to pry on the cable head, and not on the socket itself. Prying on the socket may cause it to separate from the logic board.

    Modifier

  3. MacBook Pro 15" Retina Display Mid 2012 Logic Board Assembly Replacement: étape 3, image 1 de 1

    • Peel back any tape covering the keyboard ribbon cable connector.

    Modifier

  4. MacBook Pro 15" Retina Display Mid 2012 Logic Board Assembly Replacement: étape 4, image 1 de 3 MacBook Pro 15" Retina Display Mid 2012 Logic Board Assembly Replacement: étape 4, image 2 de 3 MacBook Pro 15" Retina Display Mid 2012 Logic Board Assembly Replacement: étape 4, image 3 de 3

    • Use the flat end of a spudger to flip up the retaining flap on the keyboard ribbon cable ZIF socket.

    • Pry only under the hinged retaining flap, not the socket itself, or you may break it off the board.

    • Use the flat end of a spudger to gently back the keyboard ribbon cable out of its socket by pushing first at one side, then the other.

    Modifier

  6. MacBook Pro 15" Retina Display Mid 2012 Logic Board Assembly Replacement: étape 5, image 1 de 1

    • Use the flat end of a spudger to pry the trackpad ribbon cable connector up from its socket on the logic board.

    Modifier

  7. MacBook Pro 15" Retina Display Mid 2012 Logic Board Assembly Replacement: étape 6, image 1 de 1

    • Use the flat end of a spudger to pry the keyboard backlight connector up from its socket on the logic board.

    Modifier

  8. MacBook Pro 15" Retina Display Mid 2012 Logic Board Assembly Replacement: étape 7, image 1 de 1

    • Use the tip of a spudger or your fingernail to flip up the retaining flap on the microphone ribbon cable ZIF socket.

    • Be sure you are prying up on the hinged retaining flap, not the socket itself.

    • Pull the microphone ribbon cable out of its socket.

    Modifier

  9. MacBook Pro 15" Retina Display Mid 2012 Logic Board Assembly Replacement: étape 8, image 1 de 2 MacBook Pro 15" Retina Display Mid 2012 Logic Board Assembly Replacement: étape 8, image 2 de 2

    • Use the tip of a spudger to pry the display data cable lock and rotate it toward the DC-In side of the computer.

    • Pull the display data cable straight out of its socket on the logic board.

    • Do not lift up on the display data cable, as its socket is very fragile. Pull the cable parallel to the face of the logic board.

    Modifier

  10. MacBook Pro 15" Retina Display Mid 2012 Logic Board Assembly Replacement: étape 9, image 1 de 1

    • Use the flat end of a spudger to carefully pry off the rubber screw cap on the raised screw head near to the MagSafe 2 connector.

    Modifier

  11. MacBook Pro 15" Retina Display Mid 2012 Logic Board Assembly Replacement: étape 10, image 1 de 1

    • Remove the following six screws securing the logic board to to the upper case:

    • One 2.6 mm T5 Torx screw

    • Two 5.8 mm T5 Torx screws

    • One 3.8 mm T5 Torx screw

    • One 5.2 mm Raised Head T5 Torx screw

    • One 3.5 mm Silver T5 Torx screw

    Modifier

  12. MacBook Pro 15" Retina Display Mid 2012 Logic Board Assembly Replacement: étape 11, image 1 de 3 MacBook Pro 15" Retina Display Mid 2012 Logic Board Assembly Replacement: étape 11, image 2 de 3 MacBook Pro 15" Retina Display Mid 2012 Logic Board Assembly Replacement: étape 11, image 3 de 3

    • Lifting from the side nearest the battery, rotate the logic board toward the top of the MacBook Pro.

    • Using the flat end of a spudger, carefully push the MagSafe 2 connector out of its socket on the bottom of the logic board.

    • When reinstalling the logic board, check the cables at the marked locations to make sure they don't get pinned underneath the logic board.

    • Clockwise from top: keyboard, trackpad, battery, right speaker, keyboard backlight, display, microphone, headphone jack, left speaker.

    Modifier

  13. MacBook Pro 15" Retina Display Mid 2012 Logic Board Assembly Replacement: étape 12, image 1 de 1

    • Remove the logic board assembly from the MacBook Pro.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 8 autres contributeurs

Brett Hartt

Membre depuis le 04/12/10

127 876 Réputation

143 tutoriels rédigés

Badges: 52

+ 49 badges supplémentaires

Équipe

iFixit Membre de l'équipe iFixit

Staff

135 membres

16 732 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 808