Aller au contenu principal

MacBook Pro 15" Unibody 2.53 GHz Mid 2009 Lower Case Replacement

Ce dont vous avez besoin

  1. MacBook Pro 15" Unibody 2.53 GHz Mid 2009 Lower Case Replacement, Lower Case: étape 1, image 1 de 1
    • Remove the following ten screws securing the lower case to the upper case:

    • Seven 3 mm Phillips screws.

    • Three 13.5 mm Phillips screws.

  2. MacBook Pro 15" Unibody 2.53 GHz Mid 2009 Lower Case Replacement: étape 2, image 1 de 1
    • Using both hands, lift the lower case near the vent to pop it off two clips securing it to the upper case.

    • Remove the lower case and set it aside.

Conclusion

To reassemble your device, follow these instructions in reverse order.

26 autres ont terminé cette réparation.

Un commentaire

These two little plastic clamps on the upper case that snap on/off the lower case broke. I was looking through the store for replacements but I couldn't find any. Does anyone know where I can get these?

hmalissa - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 6

Total : 15,676