Réparez vos affaires Communauté Boutique

MacBook Pro 15" Unibody Early 2011 AirPort/Bluetooth Board Assembly Replacement

Conditions préalables uniquement
Ce tutoriel est uniquement destiné à être utilisé comme prérequis d'autres tutoriels. Il ne se suffit pas à lui-même.

Introduction

This guide is prereq only.

Ce dont vous avez besoin

  1. MacBook Pro 15" Unibody Early 2011 AirPort/Bluetooth Board Assembly Replacement, AirPort/Bluetooth Board Assembly: étape 1, image 1 de 1

    • Pull the camera cable connector straight out of its socket on the logic board.

    • Pull the cable parallel to the face of the logic board toward the optical drive opening.

    Traduire

  2. MacBook Pro 15" Unibody Early 2011 AirPort/Bluetooth Board Assembly Replacement: étape 2, image 1 de 1

    • Use the flat end of a spudger to carefully pry the AirPort/Bluetooth ribbon cable up off its socket on the logic board.

    Traduire

  4. MacBook Pro 15" Unibody Early 2011 AirPort/Bluetooth Board Assembly Replacement: étape 3, image 1 de 2 MacBook Pro 15" Unibody Early 2011 AirPort/Bluetooth Board Assembly Replacement: étape 3, image 2 de 2

    • Use the tip of a spudger to pry the four antenna connectors up from their sockets on the AirPort/Bluetooth board.

    Traduire

  5. MacBook Pro 15" Unibody Early 2011 AirPort/Bluetooth Board Assembly Replacement: étape 4, image 1 de 3 MacBook Pro 15" Unibody Early 2011 AirPort/Bluetooth Board Assembly Replacement: étape 4, image 2 de 3 MacBook Pro 15" Unibody Early 2011 AirPort/Bluetooth Board Assembly Replacement: étape 4, image 3 de 3

    • De-route all four antenna cables from their channels in the AirPort/Bluetooth housing.

    • De-route the camera cable from its channel in the AirPort/Bluetooth housing.

    Traduire

  6. MacBook Pro 15" Unibody Early 2011 AirPort/Bluetooth Board Assembly Replacement: étape 5, image 1 de 1

    • Remove the following two screws securing the AirPort/Bluetooth assembly to the upper case:

    • One 8.6 mm Phillips screw

    • One 3.9 mm Phillips screw

    Traduire

  7. MacBook Pro 15" Unibody Early 2011 AirPort/Bluetooth Board Assembly Replacement: étape 6, image 1 de 1

    • Remove the AirPort/Bluetooth assembly from the upper case, minding any cables that may get caught.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 7

30 derniers jours : 13

Total : 501