MacBook Pro 15" Unibody Mid 2012 Lower Case Replacement

Introduction

Remove the lower case to access most of your MacBook Pro's internals.

Remove the following ten screws securing the lower case to the upper case:
Three 13.5 mm (14.1 mm) Phillips screws.
Seven 3 mm Phillips screws.
When removing these screws, note how they come out at a slight angle. They must be reinstalled the same way.

Using both hands, lift the lower case near the vent to pop it off two clips securing it to the upper case.
Remove the lower case and set it aside.

Conclusion

To reassemble your device, follow these instructions in reverse order.

21 autres ont terminé cette réparation.

Membre depuis le 10/17/09

502 810 Réputation

407 tutoriels rédigés

Staff

135 membres

16 817 tutoriels rédigés