Aller au contenu principal

Pièces

Aucune pièce spécifiée.

  1. Remove the two 7.9 mm Phillips screws securing the left speaker assembly to the logic board.
    • Remove the two 7.9 mm Phillips screws securing the left speaker assembly to the logic board.

  2. Slightly lift the left speaker assembly off the logic board. Use the flat end of a spudger to lift the microphone and left speaker connectors out of their sockets on the logic board.
    • Slightly lift the left speaker assembly off the logic board.

    • Use the flat end of a spudger to lift the microphone and left speaker connectors out of their sockets on the logic board.

    • Pry up from beneath the wires.

    • Remove the left speaker assembly from the logic board.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 1,303