Réparez vos affaires Communauté Boutique

Macintosh Classic disassembly

Introduction

The Macintosh Classic is a computer mounted in a simple way but with two different types of screws (Torks and Philips) put in the most unattainable places.

Templates

Model Number: M0420 and M1240

Ce dont vous avez besoin

  1. Macintosh Classic disassembly, Open the Mac: étape 1, image 1 de 1

    • Turn the Mac so the screen is face-down

    • Put a cloth under the screen to not scratch the screen.

    • Unscrew the four Torx screws.

    • Two screws are on the bottom side near the ports, the other two are Hidden in the handle.

    Traduire

  2. Macintosh Classic disassembly, Discharge the Catode Ray Tube (CRT): étape 2, image 1 de 1

    • WARNING, IF YOU COME INTO CONTACT WITH THE DISCHARGE FROM THE CRT YOU RISK DYING, We recommend looking for a tutorial on YouTube

    • Connect a flat screwdriver to the CRT ground cable (black cable attached to the screw) with an alligator cable.

    • Slowly push the screwdriver under the red suction cup connected to the CRT and touch the metal part with the screwdriver.

    Traduire

  3. Macintosh Classic disassembly, Removing the motherboard.: étape 3, image 1 de 2 Macintosh Classic disassembly, Removing the motherboard.: étape 3, image 2 de 2

    • The motherboard has no screws, so it can be removed by pulling upwards.

    • Make sure to disconnect all cables.

    Traduire

  5. Macintosh Classic disassembly, Remove The Floppy Drive: étape 4, image 1 de 1

    • Remove the four screws and pay attention to the two hidden screws.

    • The Floppy lock and Disk go away easily.

    Traduire

  6. Macintosh Classic disassembly, Remove the Power Supply: étape 5, image 1 de 1

    • WARNING - The POWER SUPPLY may still contain current inside it. Do not touch any capacitors on the power supply

    • Unscrew the two screws that secure it to the chassis and remove the connected cables.

    Traduire

  7. Macintosh Classic disassembly, Remove the Chassis: étape 6, image 1 de 1

    • To remove the Chassis you must use the same Torx 15 screwdriver as the handle.

    • Unscrew the four screws and the Chassis can be removed.

    Traduire

  8. Macintosh Classic disassembly, Remove the CRT: étape 7, image 1 de 1

    • CAUTION: The cathode ray tube is under pressure, avoid scratching or breaking it.

    • To remove the CRT, simply unscrew the four screws placed at the corners.

    Traduire
Conclusion

To reassemble the device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Merci à ces traducteurs :

it en

100%

Marc developer

Bob Vick

Ces traducteurs nous aident réparer le monde ! Vous voulez contribuer ?
Commencez à traduire ›

Pièces jointes

Auteur

avec 1 autre contributeur

Marc developer

Membre depuis le 08/16/21

1 348 Réputation

4 tutoriels rédigés

Badges: 21

+ 18 badges supplémentaires

Équipe

iFanatics Membre de l'équipe iFanatics

Community

55 membres

159 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 7

7 derniers jours : 24

30 derniers jours : 114

Total : 2,621