Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Turn the device upside down and then locate the battery latch near the front of the device.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Slide the latch to the left to release the battery.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Continue holding the latch then gently pull the battery out of the device.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Slide the latch to the right to release the CD ROM drive.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Continue holding the latch then gently pull the CD-ROM Drive out of the device.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Press firmly on each end of the speaker cover and slide it to the left.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Lift the keyboard up from the back using a spudger(wedge side).
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Gently lift the keyboard until only the ribbon cable remains attached.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the six screws from the heatsink using the Philips #1 screwdriver.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Lift the heatsink from the side closest to the laptop screen.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Gently pull up on the beige ribbon lock until it moves a short distance on both sides to separate the ribbon cable from the connector.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Gently grasp the ram on the far end as shown in the picture and then pull up and away from the right side of the computer
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Gently grasp the factory installed RAM by grabbing each end as shown in the picture and pull the stick directly up
-
Annulation : je n'ai pas terminé ce tutoriel.
5 autres ont terminé cette réparation.