Réparez vos affaires Communauté Boutique

Macintosh Powerbook 5300cs Trackpad Replacement

Introduction

The trackpad is used to move the cursor on the screen. It is located below the keyboard.

Ce dont vous avez besoin

  1. Macintosh Powerbook 5300cs Trackpad Replacement, Battery: étape 1, image 1 de 1

    • The battery compartment is located in the front-right side of the laptop.

    Modifier

  2. Macintosh Powerbook 5300cs Trackpad Replacement: étape 2, image 1 de 1

    • To insert the battery, gently slide it into the compartment until it clicks in place.

    • To remove, slide the button highlighted in the red rectangle to the right to release the battery and slide it from the compartment.

    Modifier

  3. Macintosh Powerbook 5300cs Trackpad Replacement, Keyboard: étape 3, image 1 de 1

    • With the laptop upside down and with the battery removed, use a Torx #9 screw driver to remove the three .84 in. screws shown.

    Modifier

  5. Macintosh Powerbook 5300cs Trackpad Replacement: étape 4, image 1 de 2 Macintosh Powerbook 5300cs Trackpad Replacement: étape 4, image 2 de 2

    • Carefully pull up on the front of the keyboard to pop it out from the case.

    • Then slide the back out so the keyboard becomes nearly free.

    Modifier

  6. Macintosh Powerbook 5300cs Trackpad Replacement: étape 5, image 1 de 3 Macintosh Powerbook 5300cs Trackpad Replacement: étape 5, image 2 de 3 Macintosh Powerbook 5300cs Trackpad Replacement: étape 5, image 3 de 3

    • Disconnect the ribbon that is connecting the keyboard to the rest of the computer.

    • Pull the keyboard out and repair or replace as needed.

    Modifier

  7. Macintosh Powerbook 5300cs Trackpad Replacement, Trackpad: étape 6, image 1 de 3 Macintosh Powerbook 5300cs Trackpad Replacement, Trackpad: étape 6, image 2 de 3 Macintosh Powerbook 5300cs Trackpad Replacement, Trackpad: étape 6, image 3 de 3

    • Remove the front plastic panel of the laptop by carefully lifting it up.

    Modifier

  8. Macintosh Powerbook 5300cs Trackpad Replacement: étape 7, image 1 de 1

    • Remove the orange stripped ribbon that connects the trackpad to the rest of the laptop by carefully pulling up.

    Modifier

  9. Macintosh Powerbook 5300cs Trackpad Replacement: étape 8, image 1 de 2 Macintosh Powerbook 5300cs Trackpad Replacement: étape 8, image 2 de 2

    • With a Torx #9 screwdriver, remove the two .20 in. screws circled in red that are holding the trackpad in place.

    • Then disconnect the ribbon highlighted with the red rectangle connecting the trackpad to the laptop.

    Modifier

  10. Macintosh Powerbook 5300cs Trackpad Replacement: étape 9, image 1 de 1

    • The trackpad can now be removed from the laptop.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 8 autres contributeurs

Ronan

Membre depuis le 10/10/11

63 Réputation

4 tutoriels rédigés

Badges: 5

+ 2 badges supplémentaires

Équipe

Cal Poly, Team 6-1, Regan Fall 2011 Membre de l'équipe Cal Poly, Team 6-1, Regan Fall 2011

CPSU-REGAN-F11S6G1

4 membres

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 1,016