Aller au contenu principal

Mad Catz Street Fighter IV FightPad RS-DP-LS Switch Replacement

Ce dont vous avez besoin

  1. Mad Catz Street Fighter IV FightPad RS-DP-LS Switch Replacement, Rear and Side Case: étape 1, image 1 de 1
    • Use tweezers to completely remove the sticker from the rear of controller.

  2. Mad Catz Street Fighter IV FightPad RS-DP-LS Switch Replacement: étape 2, image 1 de 1
    • Find the seven 8.3 mm Phillips screws on the rear of the controller and remove them.

  3. Mad Catz Street Fighter IV FightPad RS-DP-LS Switch Replacement: étape 3, image 1 de 2 Mad Catz Street Fighter IV FightPad RS-DP-LS Switch Replacement: étape 3, image 2 de 2
    • Use a plastic opening tool to separate the rear and front casing by inserting it in-between the two cases.

    • Use the plastic opening tool to pry the two cases apart.

  4. Mad Catz Street Fighter IV FightPad RS-DP-LS Switch Replacement: étape 4, image 1 de 2 Mad Catz Street Fighter IV FightPad RS-DP-LS Switch Replacement: étape 4, image 2 de 2
    • Remove the two rubber side grips.

  5. Mad Catz Street Fighter IV FightPad RS-DP-LS Switch Replacement, RS-DP-LS Switch: étape 5, image 1 de 2 Mad Catz Street Fighter IV FightPad RS-DP-LS Switch Replacement, RS-DP-LS Switch: étape 5, image 2 de 2
    • Locate RS-DP-LS switch.

    • Pull upwards on the switch to remove it.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Jefferson Hsu

Membre depuis le 09/18/12

411 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team 1-7, Propen Fall 2012 Membre de l'équipe Cal Poly, Team 1-7, Propen Fall 2012

CPSU-PROPEN-F12S1G7

4 membres

14 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 2

Total : 1,450