Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the four rubber caps from the back by using the Phillips #00 screwdriver.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the four screws holding the cover in place by using the Phillips #00 screwdriver.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the back cover from the device by separating the back cover along its seam.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Pull the speaker cord, horizontally, by its base, away from the motherboard.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Disconnect the battery connector from the circuit board.
-
Pry the battery off the circuit board. The adhesive attaching it shouldn't require any other tools.
-
Annulation : je n'ai pas terminé ce tutoriel.
4 autres ont terminé cette réparation.