Réparez vos affaires Communauté Boutique

Makita XPH01 Drill Brush Replacement

Introduction

The drill contains two drill brushes. This guide will show you the necessary steps to locate and replace both drill brushes. It shows how to remove the battery and back panel to locate the drill brushes.

Ce dont vous avez besoin

  1. Makita XPH01 Drill Brush Replacement, Battery: étape 1, image 1 de 1

    • Hold the drill upright.

    • Place your finger on the white battery-release button.

    Modifier

  2. Makita XPH01 Drill Brush Replacement: étape 2, image 1 de 1

    • Press and hold the white release button located on the front of the battery.

    Modifier

  3. Makita XPH01 Drill Brush Replacement: étape 3, image 1 de 1

    • Slide the battery forward while pressing down on the white battery-release button.

    Modifier

  5. Makita XPH01 Drill Brush Replacement, Drill Brush: étape 4, image 1 de 1

    • Hold the drill upright with the back panel facing you.

    Modifier

  6. Makita XPH01 Drill Brush Replacement: étape 5, image 1 de 2 Makita XPH01 Drill Brush Replacement: étape 5, image 2 de 2

    • Unscrew two 18mm screws from the back panel with the Phillips PH2 screwdriver.

    Modifier

  7. Makita XPH01 Drill Brush Replacement: étape 6, image 1 de 2 Makita XPH01 Drill Brush Replacement: étape 6, image 2 de 2

    • Apply slight pressure to the sides of the backplate and pull away from the drill.

    Modifier

  8. Makita XPH01 Drill Brush Replacement: étape 7, image 1 de 3 Makita XPH01 Drill Brush Replacement: étape 7, image 2 de 3 Makita XPH01 Drill Brush Replacement: étape 7, image 3 de 3

    • Hold the drill so the back end is facing toward you.

    • Use the spudger to lift the spring clip out of the back notch.

    • Pull the spring clip forward and rest it in the front notch.

    Modifier

  9. Makita XPH01 Drill Brush Replacement: étape 8, image 1 de 2 Makita XPH01 Drill Brush Replacement: étape 8, image 2 de 2

    • Use the tweezers to pull the drill brush away from the sleeve.

    Modifier

  10. Makita XPH01 Drill Brush Replacement: étape 9, image 1 de 3 Makita XPH01 Drill Brush Replacement: étape 9, image 2 de 3 Makita XPH01 Drill Brush Replacement: étape 9, image 3 de 3

    • Use the plastic opening tool to release the clip connected to the drill brush.

    • Separate the drill brush away from the clip.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autres ont terminé cette réparation.

Auteur

avec 5 autres contributeurs

Eric Herwatt

Membre depuis le 10/05/16

984 Réputation

7 tutoriels rédigés

Badges: 12

+ 9 badges supplémentaires

Équipe

Cal Poly, Team 15-4, Livingston Fall 2016 Membre de l'équipe Cal Poly, Team 15-4, Livingston Fall 2016

CPSU-LIVINGSTON-F16S15G4

4 membres

7 tutoriels rédigés

Un commentaire

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 10

30 derniers jours : 34

Total : 5,852