Aller au contenu principal

Marshall MS-2 Speaker Replacement

Ce dont vous avez besoin

  1. Marshall MS-2 Speaker Replacement, Disassembling Marshall MS-2 Micro Amp Case Disassembly: étape 1, image 1 de 1
    • First be sure to turn the power switch to the off position.

    • Do this by turning the leftmost knob counter-clockwise as until the line points to "off."

  2. Marshall MS-2 Speaker Replacement: étape 2, image 1 de 3 Marshall MS-2 Speaker Replacement: étape 2, image 2 de 3 Marshall MS-2 Speaker Replacement: étape 2, image 3 de 3
    • Now remove the battery.

    • On the back of the device locate the battery cover.

    • Remove it by pushing down on the clip.

    • Then pull the piece of fabric until the battery comes out.

  3. Marshall MS-2 Speaker Replacement: étape 3, image 1 de 2 Marshall MS-2 Speaker Replacement: étape 3, image 2 de 2
    • Use the long, skinny phillips head screwdriver to remove the 4 7/16" screws on the back of the device in the four corners.

    • Once unscrewed, do not try to take each screw out. Move to next step once all screwed have been unscrewed.

  4. Marshall MS-2 Speaker Replacement: étape 4, image 1 de 1
    • Now pull the back panel off and place it down as shown. Pull the panel straight up so you do not lose the screws.

  5. Marshall MS-2 Speaker Replacement, Speaker: étape 5, image 1 de 1
  6. Marshall MS-2 Speaker Replacement: étape 6, image 1 de 2 Marshall MS-2 Speaker Replacement: étape 6, image 2 de 2
    • Remove the two 7/16" screws located in the bottom left and top right corners with a phillips head screw driver. After removing the screws, the metal clips will need to be removed as well.

  7. Marshall MS-2 Speaker Replacement: étape 7, image 1 de 1
    • You may now remove the speaker by pulling it straight out.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

MacKinley

Membre depuis le 10/22/13

811 Réputation

5 tutoriels rédigés

Équipe

University of Maryland, Team 1-1, Shastany Fall 2013 Membre de l'équipe University of Maryland, Team 1-1, Shastany Fall 2013

UMD-SHASTANY-F13S1G1

3 membres

5 tutoriels rédigés

4 commentaires

So where do we find a replacement speaker? If no parts are required what is the point in taking the speaker out?

Patrick Gillett - Réponse

This speaker unavailable in Marlins. Any online sources. How should an untutored amateur repairer describe the replacement in order to get the right thing

Patrick Gillett - Réponse

Any speaker that will fit should work. Might want to check to make sure the Watts they consume are the same. I imagine that if you put a speaker in that consumes more Watts you could potentially over heat the power supply or other components.

MacKinley - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 12

30 derniers jours : 32

Total : 4,281