Réparez vos affaires Communauté Boutique

Martian Victory Motherboard Replacement

Introduction

How to access and remove the motherboard of the Martian Smartwatch

Ce dont vous avez besoin

  1. Martian Victory Motherboard Replacement, Back Plate: étape 1, image 1 de 2 Martian Victory Motherboard Replacement, Back Plate: étape 1, image 2 de 2

    • Unscrew the four 3.4 mm flat head screws

    Traduire

  2. Martian Victory Motherboard Replacement: étape 2, image 1 de 1

    • Carefully lift the back plate off the watch. You will notice a lithium battery and rubber gasket attached to the back plate.

    Traduire

  3. Martian Victory Motherboard Replacement, Lithium Battery: étape 3, image 1 de 1

    • If not replacing lithium battery, skip down two steps.

    • Using the plastic removal tool, pry the battery from the backing plate. The battery is simply attached with glue.

    Traduire

  5. Martian Victory Motherboard Replacement: étape 4, image 1 de 1

    • Desolder the battery connections from the motherboard. Learn how to solder components here!

    Traduire

  6. Martian Victory Motherboard Replacement, Motherboard: étape 5, image 1 de 1

    • Use PH00 screw driver to remove two 2.4mm Phillips head screws.

    Traduire

  7. Martian Victory Motherboard Replacement: étape 6, image 1 de 1

    • Use a spudger or tweezers to remove a white sticker that covers a Phillips head screw.

    Traduire

  8. Martian Victory Motherboard Replacement: étape 7, image 1 de 1

    • Use PH00 screwdriver to remove 5.2mm Phillips head screw

    Traduire

  9. Martian Victory Motherboard Replacement: étape 8, image 1 de 3 Martian Victory Motherboard Replacement: étape 8, image 2 de 3 Martian Victory Motherboard Replacement: étape 8, image 3 de 3

    • Use ESD safe tweezers to remove the gold ribbon cable.

    • This will expose a second 5.2mm Phillips head screw that can be removed with a PH00 screwdriver.

    Traduire

  10. Martian Victory Motherboard Replacement: étape 9, image 1 de 2 Martian Victory Motherboard Replacement: étape 9, image 2 de 2

    • Use a spudger to gently pry on the motherboard towards the top of the watch, being towards the 12 o'clock position to loosen the motherboard.

    • You can now access the parts and pieces on the bottom of, and below the motherboard.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 5 autres contributeurs

Dominic Coffey

Membre depuis le 10/24/16

231 Réputation

2 tutoriels rédigés

Badges: 13

+ 10 badges supplémentaires

Équipe

IUPUI, Team 3-3, Baechle Fall 2016 Membre de l'équipe IUPUI, Team 3-3, Baechle Fall 2016

IUPUI-BAECHLE-F16S3G3

4 membres

8 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 11

30 derniers jours : 11

Total : 189