Réparez vos affaires Communauté Boutique

Matsunichi MarquisPad MP977 Front Facing Camera Replacement

Ce dont vous avez besoin

  1. Matsunichi MarquisPad MP977 Front Facing Camera Replacement, Front Facing Camera: étape 1, image 1 de 1

    • Using the PH #00 Phillips head screwdriver, unscrew the two screws.

    Modifier

  2. Matsunichi MarquisPad MP977 Front Facing Camera Replacement: étape 2, image 1 de 3 Matsunichi MarquisPad MP977 Front Facing Camera Replacement: étape 2, image 2 de 3 Matsunichi MarquisPad MP977 Front Facing Camera Replacement: étape 2, image 3 de 3

    • Place the device face down on a flat surface.

    • Insert the wide-tipped plastic opening tool into the top of the left speaker slot.

    • Be sure not to puncture the covering of the speaker.

    • Pry the back plate open and slide the tool in a clockwise direction, moving it along the opening between the device and the back plate until you reach the power button.

    Modifier

  3. Matsunichi MarquisPad MP977 Front Facing Camera Replacement: étape 3, image 1 de 2 Matsunichi MarquisPad MP977 Front Facing Camera Replacement: étape 3, image 2 de 2

    • Insert the opening tool into the slot located to the right of the speaker, at the top edge of the device.

    • Then, pry open the back plate of the device , and slide the tool counter clockwise along the device until you reach the charging port.

    Modifier

  5. Matsunichi MarquisPad MP977 Front Facing Camera Replacement: étape 4, image 1 de 1

    • Remove the back plate and place it to the side of the device.

    Modifier

  6. Matsunichi MarquisPad MP977 Front Facing Camera Replacement: étape 5, image 1 de 1

    • With the same screw driver, PH #00 Phillips head, remove the seven screws holding in the motherboard.

    • Place the screws somewhere safe where they wont fall.

    Modifier

  7. Matsunichi MarquisPad MP977 Front Facing Camera Replacement: étape 6, image 1 de 2 Matsunichi MarquisPad MP977 Front Facing Camera Replacement: étape 6, image 2 de 2

    • Gently pull the camera optic fiber out of it's slot to release the flap. This will allow the flap to open easily.

    • Be sure not to damage the camera port.

    Modifier

  8. Matsunichi MarquisPad MP977 Front Facing Camera Replacement: étape 7, image 1 de 2 Matsunichi MarquisPad MP977 Front Facing Camera Replacement: étape 7, image 2 de 2

    • Last, Insert the new camera into the pinhole camera slot.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 11 autres contributeurs

Kathryn Sherlock

Membre depuis le 03/24/15

127 Réputation

1 tutoriel rédigé

Badges: 10

+ 7 badges supplémentaires

Équipe

UMass Dartmouth, Team 4-1, Vijaybhaskar Spring 2015 Membre de l'équipe UMass Dartmouth, Team 4-1, Vijaybhaskar Spring 2015

UMASSD-VIJAYBHASKAR-S15S4G1

3 membres

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 2

30 derniers jours : 2

Total : 218