Réparez vos affaires Communauté Boutique

MerchSource the Black Series Boat Racer Battery Contacts in Remote Controller Replacement

Introduction

This repair guide will show you how to replace the metal contact points within the battery compartment of the remote controller for the MerchSource the Black Series Boat Racers device.

Ce dont vous avez besoin

  1. MerchSource the Black Series Boat Racer Battery Contacts in Remote Controller Replacement, Battery Contacts in Remote Controller: étape 1, image 1 de 2 MerchSource the Black Series Boat Racer Battery Contacts in Remote Controller Replacement, Battery Contacts in Remote Controller: étape 1, image 2 de 2

    • Turn the remote controller over to the back.

    Modifier

  2. MerchSource the Black Series Boat Racer Battery Contacts in Remote Controller Replacement: étape 2, image 1 de 1

    • Slide the battery cover off in the direction of the arrow on the cover.

    Modifier

  3. MerchSource the Black Series Boat Racer Battery Contacts in Remote Controller Replacement: étape 3, image 1 de 2 MerchSource the Black Series Boat Racer Battery Contacts in Remote Controller Replacement: étape 3, image 2 de 2

    • Remove the batteries (2 AA).

    Modifier

  5. MerchSource the Black Series Boat Racer Battery Contacts in Remote Controller Replacement: étape 4, image 1 de 1

    • Using a Phillips #1 screwdriver, remove the four screws located in the four corners of the back of the remote controller.

    • Screw length is 6 mm.

    Modifier

  6. MerchSource the Black Series Boat Racer Battery Contacts in Remote Controller Replacement: étape 5, image 1 de 2 MerchSource the Black Series Boat Racer Battery Contacts in Remote Controller Replacement: étape 5, image 2 de 2

    • Separate the two halves of the remote controller.

    Modifier

  7. MerchSource the Black Series Boat Racer Battery Contacts in Remote Controller Replacement: étape 6, image 1 de 2 MerchSource the Black Series Boat Racer Battery Contacts in Remote Controller Replacement: étape 6, image 2 de 2

    • Lift the metal tab until it is straight and can move through the slot in the battery compartment.

    Modifier

  8. MerchSource the Black Series Boat Racer Battery Contacts in Remote Controller Replacement: étape 7, image 1 de 2 MerchSource the Black Series Boat Racer Battery Contacts in Remote Controller Replacement: étape 7, image 2 de 2

    • Flip the remote controller to the external side and slide the metal connections in the battery compartment straight up.

    • Slide the new connections straight down into the slot in the battery compartment, flip to the internal side, and bend the metal tab until it's parallel with the battery compartment.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 3 autres contributeurs

Monica Reece

Membre depuis le 08/31/18

672 Réputation

5 tutoriels rédigés

Badges: 7

+ 4 badges supplémentaires

Équipe

Western Carolina University, Team S1-G3, Virtue Fall 2018 Membre de l'équipe Western Carolina University, Team S1-G3, Virtue Fall 2018

WCU-VIRTUE-F18S1G3

4 membres

10 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 3

Total : 196