Réparez vos affaires Communauté Boutique

Mi-T-M Heater MH-0190-0M10 Capacitor Replacement

Introduction

Follow this guide to replace the capacitor on a Mi-T-M heater model MH-0190-0M10.

Ce dont vous avez besoin

  1. Mi-T-M Heater MH-0190-0M10 Capacitor Replacement, Safety precautions: étape 1, image 1 de 2 Mi-T-M Heater MH-0190-0M10 Capacitor Replacement, Safety precautions: étape 1, image 2 de 2

    • Power off the machine at least one hour prior to starting repairs. Ensure the machine is completely cool to the touch.

    • Flip the power switch into the OFF position.

    • Unplug any extension cords from the included power cord.

    Traduire

  2. Mi-T-M Heater MH-0190-0M10 Capacitor Replacement, Remove the upper shell: étape 2, image 1 de 2 Mi-T-M Heater MH-0190-0M10 Capacitor Replacement, Remove the upper shell: étape 2, image 2 de 2

    • Use a 5/16 inch socket or Phillips screwdriver to remove the eight screws securing the upper shell, four on each side.

    Traduire

  4. Mi-T-M Heater MH-0190-0M10 Capacitor Replacement: étape 3, image 1 de 2 Mi-T-M Heater MH-0190-0M10 Capacitor Replacement: étape 3, image 2 de 2

    • Lift the upper shell straight up off of the machine to remove it.

    Traduire

  5. Mi-T-M Heater MH-0190-0M10 Capacitor Replacement, Disconnect the capacitor: étape 4, image 1 de 3 Mi-T-M Heater MH-0190-0M10 Capacitor Replacement, Disconnect the capacitor: étape 4, image 2 de 3 Mi-T-M Heater MH-0190-0M10 Capacitor Replacement, Disconnect the capacitor: étape 4, image 3 de 3

    • Grip the black and white wires by their connectors and pull firmly to remove them from the capacitor.

    • During reassembly, install the white and black wires on the same terminals as they were installed on the original capacitor.

    Traduire

  6. Mi-T-M Heater MH-0190-0M10 Capacitor Replacement, Remove the capacitor: étape 5, image 1 de 1

    • Use a Phillips screwdriver to remove the screw securing the capacitor band clamp.

    Traduire

  7. Mi-T-M Heater MH-0190-0M10 Capacitor Replacement: étape 6, image 1 de 3 Mi-T-M Heater MH-0190-0M10 Capacitor Replacement: étape 6, image 2 de 3 Mi-T-M Heater MH-0190-0M10 Capacitor Replacement: étape 6, image 3 de 3

    • Remove the capacitor.

    • During reassembly, align the foam padding between the capacitor and the band clamp.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

Sam Omiotek

Membre depuis le 02/25/19

76 055 Réputation

288 tutoriels rédigés

Badges: 35

+ 32 badges supplémentaires

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 60