Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Introduction

Almost every watchmaker from Casio to Rolex produces watches with link bands. When adjusting or repairing a band becomes necessary, adding and removing links with a few special tools is the only solution. This comprehensive guide will demonstrate how to properly perform such manipulations on a Michael Kors brand wristwatch.

Pièces

Aucune pièce spécifiée.

  1. Place the watch on your wrist  and determine whether links should be added or removed.
    • Place the watch on your wrist and determine whether links should be added or removed.

    • If watchband needs to be expanded, approximate the number of links required.

  2. Set the watch on the block holder. Ensure the arrows located on the links are pointing downward. Ensure the arrows located on the links are pointing downward.
    • Set the watch on the block holder.

    • Ensure the arrows located on the links are pointing downward.

  3. Le kit d'outils Essentiel

    Les outils les plus utiles dans notre kit le plus compact.

    J'achète

    Le kit d'outils Essentiel

    Les outils les plus utiles dans notre kit le plus compact.

    J'achète
  4. When removing damaged or extra links, hold one end of the pin pusher against the pin to be removed.
    • When removing damaged or extra links, hold one end of the pin pusher against the pin to be removed.

    • Strike the other end of the pin pusher with the metal side of the watch hammer until the pin slides out.

    • Two pins hold each link to the band, so two pins must be removed per link.

  5. Discard the broken links or save any extra links that you remove.
    • Discard the broken links or save any extra links that you remove.

  6. To add links to the watchband, position the watch on the block holder with the arrows facing upward. Insert pins into the holes that connect the new link to the rest of the watchband.
    • To add links to the watchband, position the watch on the block holder with the arrows facing upward.

    • Insert pins into the holes that connect the new link to the rest of the watchband.

    • Use the soft side of the hammer to strike the pin down.

  7. Lastly, make sure that all the pins joining the links are secured in place. Lastly, make sure that all the pins joining the links are secured in place.
    • Lastly, make sure that all the pins joining the links are secured in place.

Conclusion

To reassemble your device, follow these instructions in reverse order.

5 autre(s) ont terminé cette réparation.

Jack Beinkampen

Membre depuis le 06/10/2016

229 Réputation

1 tutoriel rédigé

Équipe

University of Memphis, Team 4-5, Baddour Fall 2016 Membre de l'équipe University of Memphis, Team 4-5, Baddour Fall 2016

UM-BADDOUR-F16S4G5

3 membres

2 tutoriels rédigés

How do I replace a broken link when it's the very first link that connects the band to the actual watch?

Karen Perri - Réponse

How can I puchace the first link on my Michael kors ceramic watch

melissa.costello31 -

I need first link to attach to micheal kors ceramic white watch

melissa.costello31 -

The lady when I bought my watch at the mall told me that Michael Kors will give you two free links I'm trying to figure out how I can go about getting that

Claudia Mead - Réponse

Where can I get the white bands that cover the links on my my watch as a few have bits broken

Karenclemo@gmail.com - Réponse

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 41

7 derniers jours : 216

30 derniers jours : 1,422

Total : 53,186