Menu 

Vos paramètres

Microsoft Natural Multimedia Keyboard disassembly and cleaning

Rédigé par : asvnix (et 4 autres contributeurs)
  • Commentaires : 1
  • Favoris : 4
  • Réparations terminées : 8

Difficulté

Modérée

Étapes

7

Sections

1

Drapeaux

1

Member-Contributed Guide

Un membre a contribué à ce tutoriel

Un membre de notre communauté tout à fait remarquable a réalisé ce tutoriel. Il n'a pas été dirigé par l'équipe iFixit.

Introduction

A guide showing how to disassemble and clean a Microsoft Natural Multimedia Keyboard.

Outils

Acheter ces outils

Pièces

Aucune pièce spécifiée.

  1. A guide showing how to disassemble and clean a Microsoft Natural Multimedia Keyboard. You will need a spudger to remove the keys. An IC mounting tool can be helpful in replacing them. You will need a spudger to remove the keys. An IC mounting tool can be helpful in replacing them.

    • A guide showing how to disassemble and clean a Microsoft Natural Multimedia Keyboard.

    • You will need a spudger to remove the keys. An IC mounting tool can be helpful in replacing them.

    Traduire

  2. Use the flat end of a spudger to pop the keys off the keyboard. Use the flat end of a spudger to pop the keys off the keyboard. Use the flat end of a spudger to pop the keys off the keyboard.

    • Use the flat end of a spudger to pop the keys off the keyboard.

    Traduire

  3. Wider keys will have a retaining bar, take note of how they come off to make reassembly easier. Continue removing keys. Continue removing keys.

    • Wider keys will have a retaining bar, take note of how they come off to make reassembly easier.

    • Continue removing keys.

    Traduire

  5. Remove the 10 screws from the bottom of the keyboard. Remove the upper button assembly. Remove the upper button assembly.

    • Remove the 10 screws from the bottom of the keyboard.

    • Remove the upper button assembly.

    Traduire

  6. Use the tip of a spudger to push the upper button assembly buttons out from the back. Use the tip of a spudger to push the upper button assembly buttons out from the back. Use the tip of a spudger to push the upper button assembly buttons out from the back.

    • Use the tip of a spudger to push the upper button assembly buttons out from the back.

    Traduire

  7. Remove the flexible keypad from the key caddy assembly. The key caddies can be washed in the sink. The key caddies can be washed in the sink.

    • Remove the flexible keypad from the key caddy assembly.

    • The key caddies can be washed in the sink.

    Traduire

  8. The keys can also be washed.

    • The keys can also be washed.

    • Remove the metal retaining clips before washing to prevent rust.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

8 autre(s) ont terminé cette réparation.

Auteur

avec 4 autres contributeurs

asvnix

Membre depuis le 18/11/2012

256 Réputation

1 tutoriel rédigé

Badges: 5

+ 2 badges supplémentaires

Un commentaire

Ajouter un commentaire

Thank you so much! I had never done this before and was very confused by the retaining bar.

Des Blackoak - Réponse

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 15

7 derniers jours : 32

30 derniers jours : 99

Total : 8,827