Pour réparer ensemble - Je crée un compte

Microsoft Surface Headphones Motherboard Replacement

Ethan Haight et 2 autres contributeurs

Dernière mise à jour le 1 juin 2022

2 k

Afficher les statistiques :

Dernières 24 heures :: 3
Sept derniers jours :: 10
Trente derniers jours :: 61
Total :: 1 962

1 commentaire d'étapes.

6 personnes ont marqué ce tutoriel comme « terminé ». Serez-vous la prochaine ?

Personne n'a mis ce tutoriel en favori (ni ne s'y est abonné). Serez-vous le premier ?

15 - 20 minutes

Difficile

A besoin de meilleures images

De meilleures photos amélioreront ce tutoriel. Aider en proposant de nouvelles photos!

Meilleure introduction

Améliorez ce tutoriel en complétant ou modifiant l'introduction.

Introduction

Passez à l'étape 1 ↓

The Microsoft Surface Headphones motherboard is the central piece that ties all the other components together. If it becomes damaged, the entire system can't operate properly. Rather than throwing the whole thing away, repairing the motherboard can restore full functionality through a few minutes of repair.

Caution: desoldering and soldering presents potential for device damage.

Ce dont vous avez besoin

Outils

Afficher plus…

1. Étape 1 Motherboard
  Firmly grasp the ear cushions and rotate them counterclockwise, about 45 degrees, until you hear a "click."
  
  To replace the motherboard, you only need to remove the right cushion, labeled with an "R" on the headband.
  Modifier
  
  Demander à FixBot
  
  Ajouter un commentaire
  
  1024
2. Étape 2
  Use a Phillips #00 screwdriver to remove the three 2.6 mm screws securing the right speaker housing to the chassis.
  Modifier
  
  Demander à FixBot
  
  Ajouter un commentaire
  
  1024
4. Étape 3
  Lift the speaker housing away from the chassis, taking care not to damage the motherboard connections.
  
  Desolder the two speaker motherboard connections.
  
  Desoldering and soldering are delicate procedures, and there is a potential for device damage.
  Modifier
  
  Demander à FixBot
  
  Ajouter un commentaire
  
  1024
5. Étape 4
  Desolder the red and black speaker connections.
  
  Desoldering and soldering are delicate procedures, and there is a potential for device damage.
  Modifier
  
  Demander à FixBot
  
  Ajouter un commentaire
  
  1024
7. Étape 5
  Desolder the 23 connections from the motherboard.
  
  Desoldering and soldering are delicate procedures, and there is a potential for device damage.
  
  Before soldering the connections to your new motherboard, be sure to pay close attention to which wire goes where; they're very easy to mix up.
  Modifier
  
  Demander à FixBot
  
  Ajouter un commentaire
  
  1024
8. Étape 6
  Use a Torx screwdriver to remove the four screws.
  
  Lift the motherboard up and out of the chassis.
  Modifier
  
  Demander à FixBot
  
  Ajouter un commentaire
  
  1024