Réparez vos affaires

Droit à la réparation

Pièces & Outils

Microsoft Zune 80 Case Replacement

Rédigé par : turey (et 8 autres contributeurs)

Commentaires : 0
Favoris : 2

Microsoft Zune 80 Case Replacement

Difficulté

Modérer

Étapes

3

Temps nécessaire

10 minutes

Introduction

Removal of case backing, allowing for access to internal components.

Outils

Acheter ces outils

Pièces

Aucune pièce spécifiée.

Étape 1 Case

Use a metal spudger or Zune opening tool to remove the small silver plastic cap on top of the device.

Use a metal spudger or Zune opening tool to remove the small silver plastic cap on top of the device.

Étape 2

There are two T4 screws under the cap. Remove both with a T4 screwdriver.

There are two T4 screws under the cap. Remove both with a T4 screwdriver.
Be careful removing the screws; the screw heads can break very easily.

Étape 3

Using a metal spudger or Zune opening tool, remove the aluminum backing starting from the top. There are 5 clips on each side and two on the bottom.

Be careful not to press the tools in too far; there are exposed cables right inside the edge of the device.

Be careful not to press the tools in too far; there are exposed cables right inside the edge of the device.

Using a metal spudger or Zune opening tool, remove the aluminum backing starting from the top. There are 5 clips on each side and two on the bottom.
Be careful not to press the tools in too far; there are exposed cables right inside the edge of the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 8 autres contributeurs

turey

Membre depuis le 11/11/2009

333 Réputation

2 tutoriels rédigés

+ 7 badges supplémentaires

Équipe

Cal Poly, Team 6-5, Maness Fall 2009 Membre de l'équipe Cal Poly, Team 6-5, Maness Fall 2009

CPSU-MANESS-F09S6G5

5 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 16

Total : 3,998