Aller au contenu principal

Introduction

Removal of case backing, allowing for access to internal components.

Pièces

Aucune pièce spécifiée.

  1. Microsoft Zune 80 Case Replacement, Case: étape 1, image 1 de 1
    • Use a metal spudger or Zune opening tool to remove the small silver plastic cap on top of the device.

  2. Microsoft Zune 80 Case Replacement: étape 2, image 1 de 1
    • There are two T4 screws under the cap. Remove both with a T4 screwdriver.

    • Be careful removing the screws; the screw heads can break very easily.

  3. Microsoft Zune 80 Case Replacement, Remove the Casing: étape 3, image 1 de 2 Microsoft Zune 80 Case Replacement, Remove the Casing: étape 3, image 2 de 2
    • Using a metal spudger or Zune opening tool, remove the aluminum backing starting from the top. There are 5 clips on each side and two on the bottom.

    • Be careful not to press the tools in too far; there are exposed cables right inside the edge of the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

turey

Membre depuis le 11/11/2009

355 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team 6-5, Maness Fall 2009 Membre de l'équipe Cal Poly, Team 6-5, Maness Fall 2009

CPSU-MANESS-F09S6G5

5 membres

5 tutoriels rédigés

Un commentaire

I have followed these steps but im unable to get the back case off, any tips for a stubborn backing?

zippy9765 - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 4

30 derniers jours : 24

Total : 4,366