Introduction
When using the Milwaukee 2630-20, the gearcase acts as a shield, protecting you from flying debris and wood. Damage to the upper gearcase can potentially cause a risk in performance problems, damage with prolonged use, and a risk to the safety of the user. If there is damage or chipping to the upper gearcase with exposure to the blade, please refer to this guide to replace the upper gearcase.
Ce dont vous avez besoin
-
-
Remove three 8 mm screws from the top of the upper gearcase using a Torx T6 screwdriver.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.
Équipe
University of North Texas, Team 4-8, Harold Fall 2023 Membre de l'équipe University of North Texas, Team 4-8, Harold Fall 2023
UNT-HAROLD-F23S4G8
3 membres
5 tutoriels rédigés
