Réparez vos affaires Communauté Boutique

Milwaukee Hex Impact Driver 2750-20 Chuck Drive Shaft Replacement

Introduction

The following repair guide shows how to remove and replace the chuck drive shaft in a Milwaukee Hex Impact Driver 2750-20.

Ce dont vous avez besoin

  1. Milwaukee Hex Impact Driver 2750-20 Chuck Drive Shaft Replacement, Outer Casing: étape 1, image 1 de 1

    • Remove the five T9 15.5 mm screws.

    • Remove the single T9 19.5mm screw.

    • Remove the two T9 37mm screws.

    Modifier

  2. Milwaukee Hex Impact Driver 2750-20 Chuck Drive Shaft Replacement: étape 2, image 1 de 1

    • Remove the drill casing to expose the drill's interior parts.

    Modifier

  4. Milwaukee Hex Impact Driver 2750-20 Chuck Drive Shaft Replacement, Chuck Drive Shaft: étape 3, image 1 de 3 Milwaukee Hex Impact Driver 2750-20 Chuck Drive Shaft Replacement, Chuck Drive Shaft: étape 3, image 2 de 3 Milwaukee Hex Impact Driver 2750-20 Chuck Drive Shaft Replacement, Chuck Drive Shaft: étape 3, image 3 de 3

    • Pulling directly outward, remove the driver head from the motor assembly by picking it up out of the casing.

    Modifier

  5. Milwaukee Hex Impact Driver 2750-20 Chuck Drive Shaft Replacement: étape 4, image 1 de 1

    • Remove the drive shaft assembly from the motor coils.

    • There will be resistance when removing the drive shaft as there is magnetism working against you.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 2 autres contributeurs

Charles Putnam

Membre depuis le 02/12/19

409 Réputation

5 tutoriels rédigés

Badges: 5

+ 2 badges supplémentaires

Équipe

Western Carolina University, Team S1-G1, Virtue Spring 2019 Membre de l'équipe Western Carolina University, Team S1-G1, Virtue Spring 2019

WCU-VIRTUE-S19S1G1

4 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 11

Total : 738