Milwaukee M12 2407-20 Outer Casing Replacement

Introduction

This guide will walk through the steps to remove the service housing set (outer casing) on the Milwaukee M12 2407-20.

Remove each of the seven 14mm Pan Hd. T-10 ST screws on one side of the housing assembly using the T10 screwdriver.

Remove metal clip located at the base of the drill, where the battery is to be inserted.
You may need to use a spudger if the clip is too difficult to remove with your fingers.

Ligne d'arrivée

2 autres ont terminé cette réparation.

Membre depuis le 02/05/19

575 Réputation

4 tutoriels rédigés

APSU-MENAGARISHVILI-S19S2G1

2 membres

5 tutoriels rédigés