Réparez vos affaires Communauté Boutique

Minolta Dimage Xt Capture Button Replacement

Introduction

This guide disassembles the capture button, so the device can be checked for a broken spring or for debris blocking its movement.

Ce dont vous avez besoin

  1. Minolta Dimage Xt Capture Button Replacement, Casing: étape 1, image 1 de 3 Minolta Dimage Xt Capture Button Replacement, Casing: étape 1, image 2 de 3 Minolta Dimage Xt Capture Button Replacement, Casing: étape 1, image 3 de 3

    • Locate and remove the silver screws on each side of the camera.

    • Use the Phillips #00 Screwdriver to unscrew all 2.0mm (4 instances) and 4.0mm (2 instances) screws.

    Modifier

  2. Minolta Dimage Xt Capture Button Replacement: étape 2, image 1 de 3 Minolta Dimage Xt Capture Button Replacement: étape 2, image 2 de 3 Minolta Dimage Xt Capture Button Replacement: étape 2, image 3 de 3

    • Then, carefully pry apart the front and back outer casing away from the internal components.

    • Be aware of the ribbon wire that will disconnect when the casing is detached.

    Modifier

  4. Minolta Dimage Xt Capture Button Replacement, Capture Button: étape 3, image 1 de 1

    • Choosing the front half of the casing, locate the capture button on the top.

    • Using tweezers, apply pressure to the two black hooks (circled in red) while holding the button down from the outside of the case.

    Modifier

  5. Minolta Dimage Xt Capture Button Replacement: étape 4, image 1 de 1

    • The button will spring free. The capture device consists of the plastic button and a small metal spring.

    • The button can be reassembled by using the tweezers to place the spring rectangle-side down on the button and snapping the button back into place.

    Modifier
Conclusion

Reassemble the casing by reversing steps 1 and 2.

Auteur

avec 6 autres contributeurs

Megan Milam

Membre depuis le 03/11/13

28 Réputation

5 tutoriels rédigés

Badges: 9

+ 6 badges supplémentaires

Équipe

Clemson, Team 12-4, Benson Spring 2013 Membre de l'équipe Clemson, Team 12-4, Benson Spring 2013

CLEM-BENSON-S13S12G4

3 membres

14 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 1

Total : 439