Réparez vos affaires Communauté Boutique

Minolta QTsi Maxxum Lens Replacement

Introduction

Replace the back piece of glass so that your pictures will be clear of scratches and cracks.

Ce dont vous avez besoin

  1. Minolta QTsi Maxxum Lens Replacement, Lens: étape 1, image 1 de 2 Minolta QTsi Maxxum Lens Replacement, Lens: étape 1, image 2 de 2

    • The lens release button is located on the right front side of the camera.

    • Remove the lens from the camera by pushing the lens release button.

    Traduire

  3. Minolta QTsi Maxxum Lens Replacement: étape 2, image 1 de 1

    • The detached module has multiple screws that must be removed in order to reach the lens.

    • Once detached, remove the (4) black Phillips #00 5mm screws from the outer rim of the module.

    • Next, remove the (2) remaining black Phillips #00 5mm screws.

    Traduire

  4. Minolta QTsi Maxxum Lens Replacement: étape 3, image 1 de 2 Minolta QTsi Maxxum Lens Replacement: étape 3, image 2 de 2

    • Once all screws have been removed, take the back piece off of the lens and replace it.

    • This piece should come off easily without using any tools.

    • There is film underneath the last 2 screws that are removed so be careful when taking it out because it could rip.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 2 autres contributeurs

Jordan Ellery

Membre depuis le 10/10/16

388 Réputation

3 tutoriels rédigés

Badges: 9

+ 6 badges supplémentaires

Équipe

Sam Houston State, Team 12-4, Blackburne Fall 2016 Membre de l'équipe Sam Houston State, Team 12-4, Blackburne Fall 2016

SHSU-BLACKBURNE-F16S12G4

4 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 4

30 derniers jours : 17

Total : 596