Misfit Vapor Power Button Replacement

Introduction

If the battery on the watch is working but you are struggling to turn on the watch via the power button then it might be time to replace the power button. You will need tweezers, jaxa wrench, and and iFixit opening tool.

Ce dont vous avez besoin

Étape 1 Watch Strap

Misfit Vapor Power Button Replacement, Watch Strap: étape 1, image 1 de 2

Misfit Vapor Power Button Replacement, Watch Strap: étape 1, image 2 de 2

Using your fingers, press down on the rubber circles to unbuckle the strap from itself.
Once you have removed two of the rubber circles from from a side you will be able to unbuckle the strap on that side.

Modifier

Étape 2 Battery

Misfit Vapor Power Button Replacement, Battery: étape 2, image 1 de 1

Hold the side power button to ensure the watch is completely shut down.

Modifier

Étape 3

To access the battery compartment use the Jaxa-style wrench tool. Secure the midframe while you pop up the back.
This will require an extremely high amount of force as there is a rubber seal and the fit is tight.

Modifier

Étape 4

Outil utilisé dans cette étape :

Tweezers

$4.99

J'achète

Remove the battery cover by carefully using tweezers or the iFixit opening tool.

Modifier

Étape 5

Disconnect the small ribbon cable connector.
Remove the battery from the watch.

Modifier

Étape 6 Power Button

Misfit Vapor Power Button Replacement, Power Button: étape 6, image 1 de 1

Outil utilisé dans cette étape :

Tweezers

$4.99

J'achète

Use the tweezers to gently push out the button from the frame of the watch.
Be careful not to lose any springs or other components that the power button is with.