Aller au contenu principal
  1. Lift the black cover off. Remove all 4 Phillips #2 screws. Remove all 4 Phillips #2 screws.
    • Lift the black cover off.

    • Remove all 4 Phillips #2 screws.

  2. Remove the two 24mm Phillips #2 screws.
    • Remove the two 24mm Phillips #2 screws.

    • Remove the three 8mm Phillips #2 screws.

  3. Lift the back and pry the back off. The panel is held in with clips on the side. It needs a lot of force the take it off. The panel is held in with clips on the side. It needs a lot of force the take it off.
    • Lift the back and pry the back off.

    • The panel is held in with clips on the side. It needs a lot of force the take it off.

  4. Remove the four 5mm nut screws. Remove the four 5mm nut screws.
    • Remove the four 5mm nut screws.

  5. Ignorez les nouveaux gadgets.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now

    Ignorez les nouveaux gadgets.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now
  6. Remove the seven Phillips #1 screws. Remove the seven Phillips #1 screws.
    • Remove the seven Phillips #1 screws.

  7. Remove the three Phillips #2 screws. Remove the two data/power cables.
    • Remove the three Phillips #2 screws.

    • Remove the two data/power cables.

    • Remove the two speaker cables.

  8. Pull the two tabs. Pull the connector off. Pull the connector off.
    • Pull the two tabs.

    • Pull the connector off.

  9. Remove the switch cable off. Remove the two Phillips #2 screws.
    • Remove the switch cable off.

    • Remove the two Phillips #2 screws.

  10. Remove the four display power cables. These cables are interchangeable.
    • Remove the four display power cables.

    • These cables are interchangeable.

  11. Lift the display out. Lift the display out. Lift the display out.
    • Lift the display out.

  12. Remove the four Phillips #2 screws. These screws release the display from its enclosure. Hold the screen when removing these screws.
    • Remove the four Phillips #2 screws.

    • These screws release the display from its enclosure. Hold the screen when removing these screws.

  13. Remember to plug in all the cables on the display. Remember to plug in all the cables on the display.
    • Remember to plug in all the cables on the display.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Padraic Hoselton

Membre depuis le 22/08/2017

3 029 Réputation

13 tutoriels rédigés

Équipe

Master Techs Membre de l'équipe Master Techs

Community

287 membres

819 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 48