Aller au contenu principal
  1. Lift the black cover off. Remove all 4 Phillips #2 screws. Remove all 4 Phillips #2 screws.
    • Lift the black cover off.

    • Remove all 4 Phillips #2 screws.

  2. Remove the two 24mm Phillips #2 screws.
    • Remove the two 24mm Phillips #2 screws.

    • Remove the three 8mm Phillips #2 screws.

  3. Lift the back and pry the back off. The panel is held in with clips on the side. It needs a lot of force the take it off. The panel is held in with clips on the side. It needs a lot of force the take it off.
    • Lift the back and pry the back off.

    • The panel is held in with clips on the side. It needs a lot of force the take it off.

  4. Remove the four 5mm nut screws. Remove the four 5mm nut screws.
    • Remove the four 5mm nut screws.

  5. Remove the seven Phillips #1 screws. Remove the seven Phillips #1 screws.
    • Remove the seven Phillips #1 screws.

  6. Remove all the cables. Remove all the cables. Remove all the cables.
    • Remove all the cables.

  7. Remove the four screws. Pull the motherboard up and off. Pull the motherboard up and off.
    • Remove the four screws.

    • Pull the motherboard up and off.

  8. Now you can replace it with a new one.
    • Now you can replace it with a new one.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Padraic Hoselton

Membre depuis le 22/08/2017

3 029 Réputation

13 tutoriels rédigés

Équipe

Master Techs Membre de l'équipe Master Techs

Community

287 membres

819 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 44