Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the single 18 mm Phillips #1 screw on the lamp access panel.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Pull the lamp access panel off of the back panel of the television by pulling straight back on the left side of the panel near the screw then pulling to the left.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Loosen the two Phillips #2 screws securing the lamp housing to the television until the screws will swivel vertically.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Using the handle, pull the lamp housing straight back out of the television.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the following 8 Phillips #1 screws:
-
One 22 mm Phillips #1 in the bottom right corner of the back panel.
-
One 18 mm Phillips #1 in the top middle of the back panel.
-
Six 18 mm Phillips #1 in the rest of the back panel.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Pull the back panel off of the television by gripping the sides and rotating it down.
-