Aller au contenu principal

Modal MD-SPBT01 Speaker Wiring Replacement

Ce dont vous avez besoin

  1. Modal MD-SPBT01 Speaker Wiring Replacement, Speaker Wiring: étape 1, image 1 de 2 Modal MD-SPBT01 Speaker Wiring Replacement, Speaker Wiring: étape 1, image 2 de 2
    • Use the plastic opening tool to pull the metal cover off the top of the speaker.

  2. Modal MD-SPBT01 Speaker Wiring Replacement: étape 2, image 1 de 1
    • Remove the four screws that are inside the holes on the top of the speaker.

    • Use a Phillips 00 screwdriver to remove the 10mm screws.

  3. Modal MD-SPBT01 Speaker Wiring Replacement: étape 3, image 1 de 1
    • Pull the top piece of the speaker off to allow access to the interior.

  4. Modal MD-SPBT01 Speaker Wiring Replacement: étape 4, image 1 de 1
    • Locate the speaker wire connection and remove the wiring.

    • Locate the LED lighting wire and remove that as well.

  5. Modal MD-SPBT01 Speaker Wiring Replacement: étape 5, image 1 de 1
    • Once you disconnect the wires, you can remove the speaker.

  6. Modal MD-SPBT01 Speaker Wiring Replacement: étape 6, image 1 de 2 Modal MD-SPBT01 Speaker Wiring Replacement: étape 6, image 2 de 2
    • Remove the positive and negative connections for the wiring to fully disconnect the wire.

    • Now that you have removed the defective wiring, you can install a new one.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Nathan Hall

Membre depuis le 10/13/15

258 Réputation

2 tutoriels rédigés

Équipe

Sam Houston State, Team 2-4, Blackburne Fall 2015 Membre de l'équipe Sam Houston State, Team 2-4, Blackburne Fall 2015

SHSU-BLACKBURNE-F15S2G4

3 membres

4 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 2

30 derniers jours : 3

Total : 508