Aller au contenu principal

Introduction

In this guide we will be showing one how to replace the forward and backwards buttons to a Modal Rechargeable Wine Opener in 5 quick and easy steps.

  1. Carefully place the spudger under the black cylindrical ring and pry it off the top.
    • Carefully place the spudger under the black cylindrical ring and pry it off the top.

  2. Remove the spring
    • Remove the spring

    • Remove the spring guide as well to obtain clear access to the screws

  3. Fix Kits pour batterie de MacBook

    À partir de $69.99

    Buy Now

    Fix Kits pour batterie de MacBook

    À partir de $69.99

    Buy Now
  4. Remove all four 4mm screws with a J1 Screwdriver Remove the clear cylindrical cap Remove the clear cylindrical cap
    • Remove all four 4mm screws with a J1 Screwdriver

    • Remove the clear cylindrical cap

  5. Apply pressure to both of the springs on the surface near the corkscrew, releasing the button port. Apply pressure to both of the springs on the surface near the corkscrew, releasing the button port. Apply pressure to both of the springs on the surface near the corkscrew, releasing the button port.
    • Apply pressure to both of the springs on the surface near the corkscrew, releasing the button port.

  6. Remove the malfunctioning buttons from the plastic frame. Remove the malfunctioning buttons from the plastic frame. Remove the malfunctioning buttons from the plastic frame.
    • Remove the malfunctioning buttons from the plastic frame.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Lauren Spicher

Membre depuis le 15/02/2017

101 Réputation

1 tutoriel rédigé

Équipe

USF Tampa, Team 15-4, Remmell Spring 2017 Membre de l'équipe USF Tampa, Team 15-4, Remmell Spring 2017

USFT-REMMELL-S17S15G4

4 membres

1 tutoriel rédigé

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 7

Total : 161