Aller au contenu principal

Monster DNA Speaker Replacement

Ce dont vous avez besoin

  1. Monster DNA Speaker Replacement, Speaker: étape 1, image 1 de 2 Monster DNA Speaker Replacement, Speaker: étape 1, image 2 de 2
    • Remove the ear cushions and use a Phillips #2 screwdriver to unscrew the three 5mm screws.

    • Desolder the wires to completely remove the speaker.

    • Take note of the proper location of the wires reassembly.

    • Use a heatgun to loosen the glue holding down the speaker.

    • Be careful to take safety precautions such as gloves as not to cause injury.

  2. Monster DNA Speaker Replacement: étape 4, image 1 de 1
    • Pry the speaker out using a plastic opening tool or metal spudger.

    • Using too much force will damage the headphones and the new speaker may not go back into place properly.

  3. Monster DNA Speaker Replacement: étape 5, image 1 de 1
    • Insert new speaker and solder the five wires into corresponding positions onto the new speaker.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Kevin Costello

Membre depuis le 03/22/17

231 Réputation

2 tutoriels rédigés

Équipe

UMass Dartmouth, Team S4-G5, Julie Spring 2017 Membre de l'équipe UMass Dartmouth, Team S4-G5, Julie Spring 2017

UMASSD-JULIE-S17S4G5

4 membres

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 1,582