Aller au contenu principal

Monster SoundStage S1 Mini Speaker Replacement

Ce dont vous avez besoin

  1. Monster SoundStage S1 Mini Speaker Replacement, Speaker: étape 1, image 1 de 2 Monster SoundStage S1 Mini Speaker Replacement, Speaker: étape 1, image 2 de 2
    • Remove the speaker wires from the motherboard by pinching the plastic tab at the end of the cable and pulling towards you.

  2. Monster SoundStage S1 Mini Speaker Replacement: étape 2, image 1 de 2 Monster SoundStage S1 Mini Speaker Replacement: étape 2, image 2 de 2
    • Unscrew 1.2 cm Torx security screw, holding the silver circle connector, to disconnect the wire from the speakerboard to the motherboard

  3. Monster SoundStage S1 Mini Speaker Replacement: étape 3, image 1 de 1
    • Remove the black putty from the speaker wires at both ends of the speaker board.

  4. Monster SoundStage S1 Mini Speaker Replacement: étape 4, image 1 de 3 Monster SoundStage S1 Mini Speaker Replacement: étape 4, image 2 de 3 Monster SoundStage S1 Mini Speaker Replacement: étape 4, image 3 de 3
    • Solder the black plastic encasing the red and black wires.

  5. Monster SoundStage S1 Mini Speaker Replacement: étape 5, image 1 de 2 Monster SoundStage S1 Mini Speaker Replacement: étape 5, image 2 de 2
    • Remove both the black and red wires with pliers

    • Pliers may stick to speaker because it is magnetic.

  6. Monster SoundStage S1 Mini Speaker Replacement: étape 6, image 1 de 2 Monster SoundStage S1 Mini Speaker Replacement: étape 6, image 2 de 2
    • Tuck wires through the hole where the speaker is located, then gently push the speaker out.

    • The 1.2 cm Torx security screws that stayed in place near the speaker will now fall out.

    • To remove the other speaker repeat steps 3-6

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Heather Carrillo

Membre depuis le 09/12/16

412 Réputation

2 tutoriels rédigés

Équipe

CSU Fullerton, Team 2-6, Bruce Fall 2016 Membre de l'équipe CSU Fullerton, Team 2-6, Bruce Fall 2016

CSUF-BRUCE-F16S2G6

4 membres

7 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 10

Total : 493