Aller au contenu principal

Montgomery Ward GEN-39500 Antenna Replacement

Ce dont vous avez besoin

  1. Montgomery Ward GEN-39500 Antenna Replacement, Back Cover: étape 1, image 1 de 1
    • Remove the nine 35 mm Phillips screws securing the back cover of the case.

  2. Montgomery Ward GEN-39500 Antenna Replacement: étape 2, image 1 de 1
    • Carefully remove the back cover.

    • Soldered wires connect electronics on the back cover to the internal electronics. Be careful not to break any connections.

  3. Montgomery Ward GEN-39500 Antenna Replacement: étape 3, image 1 de 2 Montgomery Ward GEN-39500 Antenna Replacement: étape 3, image 2 de 2
    • Unplug the black and yellow wires connecting the power supply unit to the rest of the electronics:

    • This is not necessarily required. This step is to allow the back cover more movement as you work on the inside of the unit.

  4. Montgomery Ward GEN-39500 Antenna Replacement, Antenna: étape 4, image 1 de 2 Montgomery Ward GEN-39500 Antenna Replacement, Antenna: étape 4, image 2 de 2
    • Unsolder the wire connecting the antenna to the radio.

  5. Montgomery Ward GEN-39500 Antenna Replacement: étape 5, image 1 de 1
    • Tilt the back cover up and remove the two 7.5 mm Phillips screws holding the antenna in place.

  6. Montgomery Ward GEN-39500 Antenna Replacement: étape 6, image 1 de 1
    • Remove the antenna.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Dustin Platt

Membre depuis le 04/01/15

931 Réputation

6 tutoriels rédigés

Équipe

Cal Poly, Team 12-5, Lancaster Spring 2015 Membre de l'équipe Cal Poly, Team 12-5, Lancaster Spring 2015

CPSU-LANCASTER-S15S12G5

4 membres

13 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 3

Total : 146