Introduction

The glass covering on mobile devices can be prone to damage and constant wear and tear. The Motorola Adventure V750 has a very moderate process in replacing the front protection screen.

Pièces

Aucune pièce nécessaire.

    • Remove the back cover and battery of the Motorola Adventure V750.

    • Remove four screws that are visible using a screwdriver.

    • After removing the battery chamber, you can unclip one of the ribbons that connect the screen to the main body of the phone. This divides the phone into two halves.

  1. %Livraison gratuite pour toute commande supérieure à 100 $US ou contenant un Pro Tech Toolkit !

    Parcourez notre boutique
    • Remove two screws located at the bottom of the main display.

    • Now the display(screen) can be removed by sliding a sharp object or fingernail along the edge of the housing. This releases the clip attached to the screen.

    • Release the display up to the point where you see two metal parts (left and right of the Motorola text). The top part of the display is held on with double sided tape.

    • Gently unstick the tape and remove the display. Be careful not to bend this part.

    • Carefully install the new glass.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Kyle

Membre depuis le 01/10/2012

572 Réputation

5 tutoriels rédigés

Équipe

University of Maine, Team 1-2, Diaz Fall 2012 Membre de l'équipe University of Maine, Team 1-2, Diaz Fall 2012

UMAINE-DIAZ-F12S1G2

3 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 564