Réparez vos affaires Communauté Boutique

Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.

Motorola C290 Screen Replacement

Introduction

This repair guide describes how to remove the screen of the Motorola C290.

Ce dont vous avez besoin

  1. Motorola C290 Screen Replacement, Outside Case removal: étape 1, image 1 de 3 Motorola C290 Screen Replacement, Outside Case removal: étape 1, image 2 de 3 Motorola C290 Screen Replacement, Outside Case removal: étape 1, image 3 de 3

    • Flip open your Motorola C290.

    • Remove rubber stoppers located around main screen using a push pin.

    • This reveals four screws.

    • Use a Torx T6 Screwdriver to unscrew the four screws.

    Traduire

  2. Motorola C290 Screen Replacement, Removing the front casing: étape 2, image 1 de 2 Motorola C290 Screen Replacement, Removing the front casing: étape 2, image 2 de 2

    • Use a plastic opening tool to pry open a gap between the top cover and the face of the phone.

    • Slide the plastic opening tool along gap and pry open case.

    • Remove top cover.

    Traduire

  4. Motorola C290 Screen Replacement, Disconnect the motherboard: étape 3, image 1 de 2 Motorola C290 Screen Replacement, Disconnect the motherboard: étape 3, image 2 de 2

    • Unclip circuit attachments located on back of screen circuit board using a Spudger.

    Traduire

  5. Motorola C290 Screen Replacement, Removing the motherboard/screen: étape 4, image 1 de 3 Motorola C290 Screen Replacement, Removing the motherboard/screen: étape 4, image 2 de 3 Motorola C290 Screen Replacement, Removing the motherboard/screen: étape 4, image 3 de 3

    • Insert the plastic opening tool between the metal screen components and the plastic frame at the corners.

    • Firmly pry the screen components from the frame with a twisting motion

    • You will need to apply a good amount of force as you pry, twisting in a right-to-left motion.

    • Completely remove screen components from frame.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 12 autres contributeurs

Angelo Ballungay

Membre depuis le 04/15/10

79 Réputation

4 tutoriels rédigés

Badges: 6

+ 3 badges supplémentaires

Équipe

Cal Poly, Team 24-28, Regan Spring 2010 Membre de l'équipe Cal Poly, Team 24-28, Regan Spring 2010

CPSU-REGAN-S10S24G28

4 membres

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 1

Total : 1,751