Aller au contenu principal

Introduction

This guide requires minimal teardown and can be used to replace the plastic back case of the device.

Pièces

Aucune pièce spécifiée.

  1. Remove the battery by sliding it down the rails to which it is connected.
    • Remove the battery by sliding it down the rails to which it is connected.

  2. Find a flat head or Phillips head screwdriver.
    • Find a flat head or Phillips head screwdriver.

    • Insert the screwdriver into the holes in the plastic rod connecting the key pad guard to the rear casing.

    • Use the screwdriver to push the rods towards each other until they click out of their locked position.

    • Note: This may require a large amount of force.

  3. Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now

    Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now
  4. Slide off the antenna guard and locate the four clips on the exterior of the rear casing.
    • Slide off the antenna guard and locate the four clips on the exterior of the rear casing.

    • Simultaneously push the clips outward while lifting the old rear casing away from the rest of the device.

  5. Locate the four holes on the new rear casing.
    • Locate the four holes on the new rear casing.

    • Align the holes in the new rear casing with the clips attached the to front casing.

    • Simultaneously insert all four clips.

    • Push down firmly until you hear the clips click into place.

  6. Find a thin and sturdy screwdriver.
    • Find a thin and sturdy screwdriver.

    • Insert the screwdriver into the holes in the plastic rod connecting the new key pad guard to the rear casing.

    • Use the screwdriver to push the rods away from each other until they click into their locked position.

    • Note: This may require a large amount of force.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Andrew Lam

Membre depuis le 17/04/2012

28 Réputation

4 tutoriels rédigés

Équipe

Cal Poly, Team 9-46, Regan Spring 2012 Membre de l'équipe Cal Poly, Team 9-46, Regan Spring 2012

CPSU-REGAN-S12S9G46

5 membres

8 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 841