Aller au contenu principal

Motorola Droid Bionic LCD Replacement

Ce dont vous avez besoin

  1. Motorola Droid Bionic LCD Replacement, LCD: étape 1, image 1 de 1
    • Remove the back battery cover.

  2. Motorola Droid Bionic LCD Replacement: étape 2, image 1 de 1
    • Remove the battery

  3. Motorola Droid Bionic LCD Replacement: étape 3, image 1 de 2 Motorola Droid Bionic LCD Replacement: étape 3, image 2 de 2
    • Remove the 11 T4 Torx Screws

    • Next, remove the information sticker.

  4. Motorola Droid Bionic LCD Replacement: étape 4, image 1 de 2 Motorola Droid Bionic LCD Replacement: étape 4, image 2 de 2
    • Using a plastic removal tool, work around the edges of the back housing.

    • Lift off the back housing.

  5. Motorola Droid Bionic LCD Replacement: étape 5, image 1 de 3 Motorola Droid Bionic LCD Replacement: étape 5, image 2 de 3 Motorola Droid Bionic LCD Replacement: étape 5, image 3 de 3
    • Remove the two silver T4 screws securing the SIM tray.

    • Carefully lift the SIM tray to disconnect it from the board.

    • Carefully remove the plastic spacer beneath by lifting gently in the center with a plastic removal tool.

    • Then, using a plastic removal tool, disconnect the speaker & front facing camera assembly from the board. The speaker is attached with adhesive, so be careful not to rip the flex cable.

  6. Motorola Droid Bionic LCD Replacement: étape 6, image 1 de 1
    • Disconnect the 2 digitizer connectors using a plastic removal tool.

    • Then disconnect the LCD connector

  7. Motorola Droid Bionic LCD Replacement: étape 7, image 1 de 2 Motorola Droid Bionic LCD Replacement: étape 7, image 2 de 2
    • The board is now free from all connections. Carefully lift from the top and remove the board.

  8. Motorola Droid Bionic LCD Replacement: étape 8, image 1 de 2 Motorola Droid Bionic LCD Replacement: étape 8, image 2 de 2
    • Carefully peel the two flex cables from the back housing of the LCD. Be exceptionally careful during this process, as those flex cables can be easily ripped.

    • With the flex cables out of the way, you can now use a plastic opening tool to carefully pry the old LCD loose and out of the display.

    • If you're installing a new LCD, simply add it now and follow these instructions in reverse to complete the installation.

Conclusion

To reassemble your device, follow these instructions in reverse order.

4 autres ont terminé cette réparation.

Taylor

Membre depuis le 08/30/12

244 Réputation

1 tutoriel rédigé

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 1,766