Réparez vos affaires Communauté Boutique

Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.

Motorola Droid Turbo Dual LED Flash Board Replacement

Introduction

Use this guide to replace the dual LED flash board in your Motorola Droid Turbo.

Ce dont vous avez besoin

  1. Motorola Droid Turbo Dual LED Flash Board Replacement, Rear Case: étape 1, image 1 de 1

    • Prepare an iOpener and lay it over the rear case to soften the adhesive on securing the rear case to the phone.

    Traduire

  3. Motorola Droid Turbo Dual LED Flash Board Replacement: étape 2, image 1 de 2 Motorola Droid Turbo Dual LED Flash Board Replacement: étape 2, image 2 de 2

    • Use a plastic opening tool to pry the rear case off of the rest of the device.

    • Remove the rear case.

    • The wireless charging coil may try to stick to the rear case, so make sure to remove it from the case before fully separating the rear case from the rest of the device.

    Traduire

  4. Motorola Droid Turbo Dual LED Flash Board Replacement, Dual LED Flash Board: étape 3, image 1 de 2 Motorola Droid Turbo Dual LED Flash Board Replacement, Dual LED Flash Board: étape 3, image 2 de 2

    • Use a Jimmy to separate the dual LED flash board from the rear case.

    • The board is secured with some light adhesive, so some force may be required.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

Geoff Wacker

Membre depuis le 09/30/13

89 935 Réputation

89 tutoriels rédigés

Badges: 44

+ 41 badges supplémentaires

Un commentaire

Gostaria se possível alguem tenha o manual de serviço do Moto maxx XT 1225 ou 1254. Porf favor , ddani8260@gmail.com

Daniel Gomes - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 959