Aller au contenu principal

Motorola Droid Turbo Midframe Replacement

Ce dont vous avez besoin

  1. Motorola Droid Turbo Midframe Replacement, Rear Case: étape 1, image 1 de 1
    • Prepare an iOpener and lay it over the rear case to soften the adhesive on securing the rear case to the phone.

  2. Motorola Droid Turbo Midframe Replacement: étape 2, image 1 de 2 Motorola Droid Turbo Midframe Replacement: étape 2, image 2 de 2
    • Use a plastic opening tool to pry the rear case off of the rest of the device.

    • Remove the rear case.

    • The wireless charging coil may try to stick to the rear case, so make sure to remove it from the case before fully separating the rear case from the rest of the device.

  3. Motorola Droid Turbo Midframe Replacement, Midframe: étape 3, image 1 de 1
    • Remove the midframe bezel.

  4. Motorola Droid Turbo Midframe Replacement: étape 4, image 1 de 1
    • Remove the four Torx T5 screws securing the midframe plate.

  5. Motorola Droid Turbo Midframe Replacement: étape 5, image 1 de 1
    • Remove the midframe.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Geoff Wacker

Membre depuis le 09/30/13

89 849 Réputation

89 tutoriels rédigés

Un commentaire

Which circuits depend of the midframe?

gabriel.mourasant - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 5

Total : 1,167