Pièces

Aucune pièce nécessaire.

First begin by sliding down the battery door, and place that to the side.
  • First begin by sliding down the battery door, and place that to the side.

Ajouter un commentaire

Pull the battery tab up, and remove the battery from the phone.
  • Pull the battery tab up, and remove the battery from the phone.

Ajouter un commentaire

  • Remove the two T5 screws as shown by the markers.

Ajouter un commentaire

  • Flip the phone over to the front, and slide an opening tool as shown between the metal housing & the plastic piece covering the lower portion of the phone by the microphone.

Ajouter un commentaire

  • Now do the same to the top of the phone with your opening tool as shown to remove the other plastic piece covering the top of the phone.

Ajouter un commentaire

  • Now with both of the plastic covers removed, remove the 4 silver T5 screws on the top and bottom of the unit as shown.

Ajouter un commentaire

  • Starting on the top right side of the phone, run your opening tool down the side and all the way around with slight force to begin to separate the back housing from the front assembly.

  • Look at the two pictures showing the clips to help you know where they are located.

Ajouter un commentaire

  • You can easily release the two clips on the right side (nearest the headphone jack) by pressing in the black plastic tabs inside the metal clips. The torx screwdriver you used earlier works well for this.

Ajouter un commentaire

  • Congratulations! You have now successfully removed your back housing from your Droid X!

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

6 autre(s) ont terminé cette réparation.

Josh Forester

Membre depuis le 28/11/2010

2 309 Réputation

10 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 3

Total : 5,455