Introduction
If the stand housing is cracked and cannot hold up the camera of the baby monitor, then this guide shows consumers percisely how to remove and replace the stand.
Ce dont vous avez besoin
-
-
Remove two 5 mm Phillips #1 screws from the bottom of the camera stand.
-
-
Presque terminé !
To reassemble your device, follow these instructions in reverse order.
Conclusion
To reassemble your device, follow these instructions in reverse order.
Équipe
Eastern Washington University, Team S1-G6, Crawford Winter 2019 Membre de l'équipe Eastern Washington University, Team S1-G6, Crawford Winter 2019
EWU-CRAWFORD-W19S1G6
4 membres
4 tutoriels rédigés
