Réparez vos affaires Communauté Boutique

Motorola Moto 360 3rd Gen Lower Case Replacement

Introduction

Use this guide to replace the lower case on your Motorola Moto 360 3rd Gen smartwatch.

Ce dont vous avez besoin

  1. Motorola Moto 360 3rd Gen Lower Case Replacement, Lower Case: étape 1, image 1 de 2 Motorola Moto 360 3rd Gen Lower Case Replacement, Lower Case: étape 1, image 2 de 2

    • Use a T4 Torx screwdriver to remove the four 4.2 mm screws securing the lower case.

    • Gently pry the case open with a halberd spudger if the case will not release after removing the bolts.

    • Do not remove the lower case completely yet; this could damage cables connected to the lower case.

    Modifier

  3. Motorola Moto 360 3rd Gen Lower Case Replacement: étape 2, image 1 de 1

    • Raise the cover without straining the connected ribbon cable.

    • Disconnect the ribbon cable from the motherboard with a halberd spudger.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

Connor Bassolino

Membre depuis le 03/29/22

6 664 Réputation

28 tutoriels rédigés

Badges: 24

+ 21 badges supplémentaires

Équipe

iFixit Membre de l'équipe iFixit

Staff

136 membres

17 449 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 58