Introduction
The battery in your Motorola Moto E6 phone needs to be replaced if your phone won’t turn or stay on. Use this guide to completely remove the back of the phone, which is helpful for other repairs and for replacing the battery.
Before you begin, download the Rescue and Smart Assistant app to backup your device and diagnose whether your problem is software or hardware related.
Ce dont vous avez besoin
-
-
Begin by prying open the bottom right of the device using the plastic opening tool.
-
Work your way around the edge of the device, slowly prying open the casing until it pops off.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
5 autres ont terminé cette réparation.
Équipe
Cal Poly, Team S2-G3, White Winter 2020 Membre de l'équipe Cal Poly, Team S2-G3, White Winter 2020
CPSU-WHITE-W20S2G3
4 membres
10 tutoriels rédigés
3 commentaires
If I had known it’d take two steps I would have put the new battery in weeks ago! lol Currently waiting for the phone to dip under 10% before charging it. The steps are very easy and understandable.
Oh I want everyone to be aware this tool plastic opening tool, the ends are sharp! I was very lucky it wasn’t deep, just very shallow. I used a towel so I don’t scratch the table and keep the phone safe since it has glass.
I’ll report back once the battery fully charges. I hope it goes well! I need the phone working because it’s the only phone I have.
Who’s got great advice on opening super-stubborn case? Trying a few different plastic pry tools. (:-( (One is showing signs of plastic stress.)
