Réparez vos affaires Rejoignez la communauté Boutique

Motorola Moto G7 Screen Replacement

Introduction

The Motorola Moto G7 has a glass LCD display with a Gorilla Glass screen. Like most glass screen phones it is prone to cracks and other screen malfunctions when dropped or damaged in other ways. Damage to the screen or display may cause internal damage as well.

This guide outlines the steps to take to properly and safely remove the screen for replacement. The specific device model used in this guide is Motorola Moto G7.

See the troubleshooting page if you may not be confident in a primary assessment of the device. Always be careful handling the damaged screen as shattered glass can cause injury.

Ce dont vous avez besoin

  1. Motorola Moto G7 Screen Replacement, Screen: étape 1, image 1 de 3 Motorola Moto G7 Screen Replacement, Screen: étape 1, image 2 de 3 Motorola Moto G7 Screen Replacement, Screen: étape 1, image 3 de 3

    • Use the iFixit opening tools to gently wedge the front screen from the rest of the device.

    • Try to focus on the corners to make it easier to insert and use the iFixit opening picks.

    • It is also recommended to use the iOpener or a heat gun to weaken the adhesive that holds the edges of the screen down.

    • The screen is glass, so when using force to lift the screen, be cautious of cracked glass and stray shards of glass coming off.

    • You have to be extra careful to dig deep enough, so you lift the entire screen unit!

    Modifier

  2. Motorola Moto G7 Screen Replacement: étape 2, image 1 de 1

    • Excessive glass and adhesive around the edges should be removed with the spudger.

    • The glass is black and may blend in with edges of the device. Be cautious using bare hands when moving the device.

    Modifier

  4. Motorola Moto G7 Screen Replacement: étape 3, image 1 de 2 Motorola Moto G7 Screen Replacement: étape 3, image 2 de 2

    • Remove three 2.7mm T3 Torx screws from the metal piece to the right of the battery.

    Modifier

  5. Motorola Moto G7 Screen Replacement: étape 4, image 1 de 3 Motorola Moto G7 Screen Replacement: étape 4, image 2 de 3 Motorola Moto G7 Screen Replacement: étape 4, image 3 de 3

    • Use a spudger to gently take off the metal piece that was held down by the screws.

    • A second metal piece is held under the first. This can also be popped off by using the spudger and nudging it under the metal piece connected to the band.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

16 autres ont terminé cette réparation.

Auteur

avec 5 autres contributeurs

Peter Nelson

Membre depuis le 01/23/20

730 Réputation

3 tutoriels rédigés

Badges: 12

+ 9 badges supplémentaires

Équipe

Cal Poly, Team S19-G6, White Winter 2020 Membre de l'équipe Cal Poly, Team S19-G6, White Winter 2020

CPSU-WHITE-W20S19G6

4 membres

20 tutoriels rédigés

3 commentaires

The replacement part listed here on iFixit indicates installation adhesive is not included. Can you reuse the adhesive on the old part? If not, what adhesive is recommended for this type of repair?

Gabe LaBounty - Réponse

You can’t. I used the 1 mil tape and it worked.

Javier Vilalta - Réponse

How much would it cost to send this in for someone else to put in a new screen?

Nathaniel Mcvay - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 40

30 derniers jours : 186

Total : 9,578