Aller au contenu principal

Motorola Moto Q Back Casing Replacement

Ce dont vous avez besoin

  1. Motorola Moto Q Back Casing Replacement, Back Casing: étape 1, image 1 de 1
    • Use the Push Pin to remove the rubber screw covers by pushing the needle into the rubber and pulling up.

    • Be careful not to poke yourself when handling the push pin because it is very sharp.

  2. Motorola Moto Q Back Casing Replacement: étape 2, image 1 de 1
    • Use the T6 screwdriver to remove the four screws holding the casing together.

    • Note: they are in the same place where you removed the four rubber coverings

  3. Motorola Moto Q Back Casing Replacement: étape 3, image 1 de 2 Motorola Moto Q Back Casing Replacement: étape 3, image 2 de 2
    • Wedge the plastic opening tool in between the top and bottom cases. This may require a little or a lot of force so be careful.

    • Note: the phone should be face up and the plastic opening tool should be face downwards

    • Once you get the plastic opening tool in, slide it across the side of the phone, making sure to keep the plastic opening tool wedged in between the two casings.

    • Repeat the 3 steps above for the top, bottom, and opposite side.

  4. Motorola Moto Q Back Casing Replacement: étape 4, image 1 de 2 Motorola Moto Q Back Casing Replacement: étape 4, image 2 de 2
    • Gently lift and remove the back casing.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Luis Herrera

Membre depuis le 01/21/10

52 Réputation

4 tutoriels rédigés

Équipe

Cal Poly, Team 16-33, Maness Winter 2010 Membre de l'équipe Cal Poly, Team 16-33, Maness Winter 2010

CPSU-MANESS-W10S16G33

4 membres

10 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 2

Total : 5,143