Introduction

This guide outlines the steps to take to remove or install the SIM card. The SIM card holds information that allows the service provider to locate and identify your phone. It is necessary for sending or receiving any calls or messages.

  1. Turn the phone over.
    • Turn the phone over.

    • Press and hold the release button in the middle of the back panel to release the back cover.

    • Slide the bottom panel down to open.

  2. %Livraison gratuite pour toute commande supérieure à 100 $US ou contenant un Pro Tech Toolkit !

    Parcourez notre boutique
  3. Remove the existing SIM card (if applicable) by applying little pressure with one finger and dragging it until the card is completely out. Remove the existing SIM card (if applicable) by applying little pressure with one finger and dragging it until the card is completely out.
    • Remove the existing SIM card (if applicable) by applying little pressure with one finger and dragging it until the card is completely out.

  4. Insert the new SIM card into the card reader with the chamfered edge in the upper left corner.
    • Insert the new SIM card into the card reader with the chamfered edge in the upper left corner.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Will Dickman

Membre depuis le 27/09/2012

28 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team 6-31, Regan Fall 2012 Membre de l'équipe Cal Poly, Team 6-31, Regan Fall 2012

CPSU-REGAN-F12S6G31

5 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 2

Total : 1,448